Module de basses alimenté Sub2

SoundLink Max is IP67 rated, indicating it has passed rigorous testing conditions proving it will withstand an accidental drop into water up to approximately 3 feet (1 meter) deep for up to 30 minutes, or getting exposed to a dust storm. However, while SoundLink Max is protected against accidental exposures to water and dust, is not designed for playback when wet. All of SoundLink Max’s components, including the USB-C® charging and AUX ports, transducers, and passive radiators, are built with rugged, waterproof materials. These components are sealed tightly to the speaker’s housing, keeping out water and dust.

Yes, but it is not designed to be used while floating and will orient with the front grille submerged. SoundLink Max is designed to withstand accidental drops in water for up to 30 minutes, and remain buoyant for easy retrieval. If SoundLink Max is directly exposed to salt or chlorinated water, rinse with fresh water and allow to dry thoroughly before use.

Bose SoundLink Max Portable Speaker features Snapdragon Sound technology. Snapdragon Sound optimizes Qualcomm® audio technologies across connected devices to ensure the best sound quality, connection stability, and latency for your streaming audio. To experience Snapdragon Sound, you need a Snapdragon Sound-certified device, such as a compatible Android device. Once you connect the speaker, your device will automatically stream audio using the aptX Adaptive Bluetooth codec. NOTE: To see which Snapdragon Sound features the speaker supports and check if your device is compatible, visit: support.Bose.com/sl-max.

Google Fast Pair is a technology developed by Google to that automatically detects and pairs with your Android phone in a single tap. Android users (OS 6.0 or newer) will enjoy the rapid setup Google Fast Pair has to offer by simply turning on their SoundLink Max and selecting the Google pair pop-up on their Android device (Android device location services and Bluetooth must be set to “on”).

No, there are no microphones in the SoundLink Max.

Yes. Using Bose SimpleSync technology, you can connect to your SoundLink Max from a SimpleSync-enabled Bose smart soundbar or Bose smart speaker to extend the reach of your listening to other places in the vicinity, such as an an adjacent room. Use the Bose app to use SimpleSync.

Shortcuts are managed through the Bose app. Shortcuts allow you to configure settings for the programmable shortcut button on SoundLink Max. When your SoundLink Max is new, the factory default shortcut is set to auxiliary switching, allowing you to use the button to switch between a paired Bluetooth device or a wired connection from a different source.

Multi-point is a Bluetooth technology that allows your SoundLink Max to maintain a connection to two paired source devices at the same time. Your speaker will seamlessly transition between the two devices so you’re always connected to the active source device.

Bose SoundLink Max supports Bluetooth profiles A2DP, AVRCP, SPP, iAP, and BLE.

SoundLink Max can have up to 8 devices paired in its memory. To clear the paired devices list, turn on the speaker and press and hold the Bluetooth button for 15 seconds.